53 / 92
Alimak Hek has strengthened its light
range with the new TPL 500 and 300,
material transport platform which is
suitable for all vertical access to buildings
or scaffoldings.The TPL 500 is designed for
optimised capacity, flexibility and utility. It is
made up of folded and perforated plates, a
structural element that becomes a
rigid and anti-slip walking surface.
Hot dip galvanising on the
erection platform and ramps
reduces need for maintenance and
replacement.
The drive unit runs on mast
sections (hot dip galvanised) by
means of a series of guide rollers, mounted
on a tandem frame to distribute pressure
consistently, reducing wear, and offering
smoother travel and a longer life for the
mast sections. The two-speed or single-
phase gear-motor overload system and
safety device system are all installed in the
centre.
The mast sections are fixed to each other
by four eyebolts; the rack is screwed to
the mast. The electric control panel can be
Material hoist is lightweight and flexible
positioned on both sides of the platform.
All commands required for use of the
platform and control of the safety systems
are contained in this unit.
The Load Ramp can be installed on side
A, B and C. The Exit Ramp on A and B
includes a control bar system with vertical
or horizontal bar opening. The load ramp
can be replaced by a bi-foldable gate, to
permit easy loading of the platform with a
fork-lift.
The third side is provided with a fixed
railing or, with a ramp or bi-foldable gate.
The tie in is fixed on the mast sections with
a double frame that affords greater rigidity
to the masts. There is greater flexibility in
the positioning of the fastening pipes, both
to the scaffolding and the wall, and can be
positioned at distance not more than 7.5m.
The Cable Guide keeps the hybrid cable
(power and control) in the correct position
to allow easy storage in the cable basket
during operation. This ensures greater
safety, particularly in windy conditions.
A series of accessories are available. Roof
support frames for scaffolding pipes
are also available.
The landing gates with electric
and mechanical interlock can be
equipped with a call push-button
panel, and are easy to assemble
on both the scaffolding and the
building’s landings.
The base frame (hot dip galvanised)
with the levelling screw jacks has smaller
dimensions than the platform size, making
it easy to position the machine even in very
narrow places.
The first mast section is screwed on as is
the cable basket (till 100m).
For more information contact:
03 8795 6705 or visit the web site:
www.alimakhek.com.au
HR
There is greater flexibility in the
positioning of the fastening pipes,
both to the scaffolding and the wall...
APRODUCT OF
HARDWORK
1300 JCBCEA
|
www.
jcbcea
.com.au
PROUDDISTRIBUTOR
Did you know that JCB offer a wide
range of machinery and attachments?
Ideally suited for the hire and rental industry, our range
includes mini excavators, compaction equipment, skid
steers as well as hydraulic powerpacks and an array of
attachments.
COME AND SEE US IN ACTION AT THE
HIRE ANDRENTAL EXPO
BOOTH #248
SITE 19
ON FRIDAY 4THMAY FOR THE
EQUIPMENT INACTIONDAY
MAY 2012 | ACCESS
in
ACTION | 53
ACCESS in ACTION